---

TEMPISH Viber 80 rollers

Properties:

• TEMPISH VIBER 80 skates combine a hard freestyle boot with the speed of large 80 mm wheels.
• A special universal model designed both for shorter routes in the city and, thanks to the large wheels, also for trails.
• This skate is suitable for advanced and experienced skaters.
• The skates with a hard frame are intended for universal use due to their design and equipment.
• Maneuverability is easy thanks to the short runner.
• The skate is equipped with a combination of three 80 mm wheels, thanks to which you can reach high speeds while driving.
• It is also possible to mount smaller wheels (minimum recommended size 90mm).
• The skeleton of the skate is well ventilated - ventilation reaches the foot thanks to the ventilated insole, which has holes around the entire perimeter, including the tongue.
• The roller joint uses a screw with a special nut and washer, thanks to which the cuff is removable and can be tightened if necessary, which also guarantees a longer life than the universal rivet.
• The top metal self-locking buckle has a bend at the end for a better grip.
• The strap is attached to the frame so that it does not catch on the second roller during slalom and freestyle, the buckle itself is protected from damage by the bottom plastic tab.
• The instep strap is equipped with a single-step micro buckle with very comfortable tightening and loosening thanks to a ratchet system.
• The plastic pads on the outside of the skates are removable, as is the padding strap.
• The lace holes feature strong metal rings to protect the laces and provide a better fit.
• Thanks to the use of waxed laces with a width of 10 mm, it is possible to gradually tighten the laces and more effectively close the skeleton of the skate.
• The roller liner is ventilated, has holes all around and reinforced with PVC on the top.
• There is flexible neoprene in the toe area for added comfort.
• A loop with a reflective strip on the back.
• There are also reflective elements on the outside of the roller.
• In the Achilles tendon area, the liner is lowered and V-shaped for increased maneuverability and mobility, making it easier to perform tricks and freestyle movements.
• The lining has cutouts in the area of the ankle flexion sewn with flexible neoprene, which allows for optimal anatomical placement of the shoes while maintaining its stiffness.
• In the lower part of the lining, a material is used that glides less on the skeleton.
• The shoe has an anatomical insole with a thickness of 3 mm, which is comfortable enough, but not too soft.
• Under the insole in the heel part, a silent cushioning block made of TPR material, which perfectly absorbs vibrations and shocks, is quite thick, soft and comfortable.
• The tongue of the insole is sufficiently stiff and thick, it consists of 2 parts, thanks to which it perfectly reproduces the arch of the foot.
• The tongue holds the position well thanks to the use of a string.
• The skids made in CNC technology are strongly reinforced with a three-dimensional structure, very strong, stable and precise.
• Attached to the shoe with 2 central screws and 2 solid aluminum threaded blocks.
• Thanks to these blocks, power transmission is much more efficient.
• The undercarriage can be adjusted transversely and longitudinally.
• The hollow axles for weight reduction have a diameter of 8mm and are mounted on the left reel on the inside and on the right reel on the outside to prevent the bolts from loosening while driving.

TECHNICAL SPECIFICATIONS:

• Purpose Sports street (city) and freestyle skating, for beginners, advanced and experienced skaters
• Skid CNC structure, additionally reinforced, one-piece, crosswise and longitudinally adjustable.
• Wheelbase acc. size. 37-40: 235.5mm, 41-46: 247.5mm.
• Pink. 165 mm mounting screws
• Wheel size 76 x 24mm for size 37-40 80 x 24mm for size 41-45
• Wheel hardness 85A
• Bearings 608, ABEC-9
• Lacing system Shoelaces Type |
• Shoe shell Plastic Liner Thin nylon, absorbent microfiber
• Brake None
• Top clasp Buckle 45 degree clasp Axle buckle 8mm
• Weight limit 100 kg

Size

40